Write a Review

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Shimano FH-MT400 (Black), Shimano logo, 12mm E-THRU, O.L.D. 142mm - Rear hub (2): Shimano FH-MT4050 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Rear Quick Release binder included (FH-MT4050) - E-THRU Axles not included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place

Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

SRAM's X-Sync Boost Direct Mount Chainring features tall teeth with alternating tooth profiles that hold the chain amazingly well and still provide space for mud to clear. - Chainring BCD: SRAM BB30 Direct Mount, SRAM GXP Direct Mount - Color: Black - Drivetrain Speeds: 10, 11 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Offset: 3mm

The Carbon Streem features an extremely aggressive wing-shaped top section that saves watts while providing an incredibly comfortable hand position for cruising uphill. The drops feature a traditional bend-the choice of many Ritchey-sponsored pro riders - UCI compliant 43.5x16mm wing-shaped top section cuts through the wind - Gentle sweep to tops and broad platform-great for seated climbing - Internal cable groove-no need to tape all the way to the stem - No-slip grit at stem and brake lever clamp areas - Fully internal routing for Shimano Di2 EW-RS910 Junction box - Carbon monocoque - Compatible w/ Shimano EW-RS910 junction box/end plug + internal routing - Measured center-to-center where the levers mount - 31.8mm center section - Drop/Reach: 38cm = 130/75mm; 40, 42, 44cm = 130/80mm - Available in matte UD carbon finish - 195g (42mm)

- Visor: Yes - Impact Protection System: MIPS - Certification: CPSC, EN1078 - e-Bike approved: No

The Trailcross Clip-In is the latest addition to the Five Ten Trailcross family, designed from the ground up with adventure at its core. Packed with all the Trailcross technology, this latest model provides clip-in performance on the bike and all-day comfort when hiking off the bike. The addition of the Clip-In model takes the range to the next level, making our award-winning design available to clip-in pedal users for the first time. The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure. - Lace & velcro closure - Breathable mesh - RPU overlays - Impact resistant toe box - Lightweight eva w/ hike a bike last - Stealth marathon

Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)

Five steps up from your standard trail helmet! A lightweight all-purpose MTB helmet for trail riding, cross-country training, and backcountry or gravel adventures. This helmet is well-ventilated with maxiflow air channels and the Dri-Lex® liner is washable, moisture-wicking, anti-odor, and breathable. What is most important about the Leatt MTB 2.0 helmet is the head and brain protection level it offers. Featuring 360 Turbine Technology, the helmet is lined with turbines which are 360 °moving discs constructed from an energy-absorbing foam and material. This tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at the concussion level. Be comfortable and ride safely. Details: - Lightweight Polymer Compound shell in three sizes - MaxiFlow impact foam air channels are effective even at low speed - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - In-molded impact foam for great energy absorption - Maximized ventilation with 20 vents - Visor with breakaway function for rotational impact force reduction - Dri-Lex® moisture-wicking, breathable, anti-odor, and washable inner liner - Weight: from 300g (0.65 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203

Add some cargo capacity to your bike with Sunlite's Lift-Off Front Basket. This no-frills hauler hooks over your bars and has a handle for easy carrying. It's sturdy, simple and functional.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

Louis Garneau's Leg Warmers 2 are crafted from Garneau's HeatMaxx nylon/spandex material with soft brushed insides for optimal moisture transfer and heat retention. You'll also appreciate the comfy flatlock seams, silicone thigh grippers to keep them in place, UPF 50 sun protection, and reflective accents for enhanced visibility. And, when you warm up, these warmers are easily stashed in a pocket or pack.

The MET Roam MIPS is designed for all-mountain and enduro riding. The back of the head and the temples are especially in need of protection from impact, so we’ve increased the coverage around these key areas, without sacrificing the helmet’s light weight. The injection-molded visor is flexible to adapt to the shell of the helmet in a crash. This unique feature helps to manage extra rotational forces transferred to your neck. There are clips on the visor and a rear edge, which keep goggle straps in place during the ride, achieving ultimate compatibility with your eyewear. Featuring the MIPS-C2 rotational management system, the Roam is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The MIPS-C2 solution separates the shell and the liner with a thin plastic Low Friction Layer (LFL). The Roam Mips features 22 vents that work together with the purpose-built internal channel to provide optimal airflow at high and low speed. The MET Roam has also been rewarded for its comfortable fit. The inner padding has an extended surface area which provides the perfect stability without disturbing internal airflow. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - Exceptionally comfortable and secure on the head thanks to a refined internal shape and stabilizing inner padding - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Orbital Fit System - The 360° head belt with vertical and occipital adjustments help to maximize adjustability - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Integrated goggle strap clips and sunglass ports to securely dock eyewear when climbing or resting - 22 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 62cm

From top to chonky bottom, the Bigfoot VLT 2 is engineered with all the unique performance and features that serious Fat Bikers demand. Shimano's EP8 drive system combines high torque electric assist with your choice of 540Wh, 720Wh or 900Wh in-tube batteries. (sold separately) Charge Forward The Bigfoot VLT's rider cockpit is optimized for quick, efficient climbing and its progressive geometry makes for confident, stable descents. Extra Fat Massive standover clearance and thru axles set the Bigfoot VLT's aluminum frame apart and internally routed cables provide a clean look and keep critical systems working great. Year-Round Performance Cold-weather optimized hydraulic components including suspension, dropper post and disc brakes are ultra-reliable when temps plummet and deliver all year long. Choose your Juice Custom select your battery capacity from 540Wh, 720Wh or massive, industry-leading 900Wh depending on how you ride. Lighter weight for speedy laps, mammoth range for epic adventures, or somewhere in between. VLT batteries are sold separately. When purchasing this bike, make sure you have added the bike and your choice of battery to your shopping cart before you check out. Bike orders cannot be fulfilled without a battery. Shimano STEPS Shimano STEPS EP8 drive units give you extra everything and provide the push you need to get through the tough stuff. Removable Battery All batteries can be installed in minutes with one tool. Batteries are encased within the downtube for protection and can be easily removed for charging on and off the bike or for easy swaps. High-Flotation Wheels & Tires 80mm rims and studdable 27.5 x 4.5" tires put more rubber on the ground. The massive footprints float over snow and sand and soften the blow from gnarly trail features with immense amounts of traction. Ample clearance for 4.6" rubber. REASONS IT'S RAD: - Modern MTB handling through treacherous terrain. - VLT gives you more of what you love about Fat Biking. - Components optimized for the cold – and beyond - ALL the power you need - Determine how far and how fast you want to ride. - Removable battery for easy charging and one-tool swaps. - Fat 4.6" rubber for maximum grip and cush

Jobst Brandt was an important figure in Tom Ritchey's life. Along with Tom's father, who was also a cyclist, Jobst was an important mentor for Tom - faithfully sharing his vast engineering wisdom while also actively influencing Tom's riding. Bound only to the thrill of experience and exploration, for decades Jobst's and Tom's tires rode over more than a few different surfaces on any given ride. It's these adventures with Jobst that helped inspire the Alpine JB tire. This unique bicycle tire is built to ride wherever your two-wheeled journeys may take you. It rolls beautifully on all-day rides along smooth country roads, yet it has enough tread to gracefully navigate roads with minimal municipal maintenance or long stretches of gritty gravel. The Alpine JB enjoys a 120 TPI casing, is tubeless-ready and employs the unique VFA tread design - a pattern that's mostly recessed in the rubber of the tire, rather than relying on protruding knobs more commonly found on such tires. Thanks to the inverse tread, rolling resistance is smoother compared to traditional knobby tires, yet grip and confidence remain inherent features. An added benefit is that the Alpine JB is more durable because there are no knobs to wear down. - Tubeless-ready (only 35c) - VFA tread design - Stronghold Casing - 120 TPI

Fuel EX 9.9 combines a light and nimble carbon frame with Shimano's best drivetrain and top-shelf suspension for a ride that's ready to rally wherever you point it. It's dripping with high-end upgrades like buttery-smooth Kashima coat, quick-engaging carbon wheels, a super-slick one-piece bar and stem, and handy multi tool hidden in the steerer tube. You want a do-it-all mountain bike that's second to none. You care about it all—from a pristine carbon frame and wheels to the lightest and best drivetrain from Shimano, and you don't want to sacrifice suspension performance for anything. You have good taste, and you know it. A light and stiff OCLV Mountain Carbon frame with a 150mm FOX Factory 36 fork with EVOL air spring and GRIP2 damper and FOX Factory Float rear shock with 2-position damper that makes light work of the gnarliest rock gardens on the mountain. Carbon wheels that keep weight down while offering stiff and reliable tracking through rowdy terrain, and Shimano's finest drivetrain with the lightweight, reliable, and precise XTR component package. Plus, you'll get adjustable geometry for fine-tuning your ride and in-frame storage that lets you keep your setup tidy without leaving behind trail essentials. Fuel EX 9.9 is a top-tier trail bike that's built for riders with an affinity for the finer things in life. It's a complete package, with the industry's best components from the ground up, with Shimano's XTR drivetrain, FOX Factory fork, carbon wheels and frame, and geometry that's ready to be tuned for how you ride. - You can tackle any trail on the mountain with its progressive geometry that makes light work of steep, punchy climbs, and turns around to rally the descents - Its cream of the crop component package has you fully equipped with the finest shifting groupset from Shimano, and buttery-smooth suspension from Fox - It comes with light and stiff carbon wheels that make quick work of technical terrain and keep you on your line, even when things get hairy - With the adjustable angle headset (angled cups sold separately) and Mino Link, you can choose from six different geometry configurations Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Small – X-Large: 29-inch

- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt

Rail 5 is a full-suspension electric mountain bike built for ripping the big stuff. It features the same high-end trail tech as our analog trail bikes, plus a powerful Bosch drive system that's basically like having your own shuttle. It's right for you if... You’re looking for an e-MTB that’s just as ready to shred as non-electric trail bikes. You want a powerful Bosch drive system that’ll propel you up climbs so you can hit lap after lap. The tech you get A burly alloy frame with 150mm of rear travel and a 500Wh Removable Integrated Battery, an e-MTB optimized 160mm RockShox 35 Gold RL fork, the latest from Bosch with smart system Performance Line CX capable of speeds up to 20MPH, including the new Bluetooth® LED remote for easy connectivity. Plus, a 1x12 drivetrain with a wide gear range so you can always find the ideal cadence for the motor, a dropper post, powerful 4-piston brakes for more downhill confidence, and 29er wheels with nimble yet grippy 2.6" tires. The final word Rail 5 is our best-value long-travel e-MTB. It's equally as capable as our regular long-travel trail bikes, it just gets you back to the top in a flash. The powerful Bosch drive systems and durable part spec make for long-lasting fun. Why you'll love it - Trek's Removable Integrated Battery (RIB) system looks great and is super user-friendly: it fully hides the battery in the frame for protection, makes it easy to remove the battery without tools and lets you mount a water bottle cage - Bosch's new smart system gives you all the same power and responsiveness with a new Bluetooth-connected LED remote that puts even more control and customization at your fingertips The controller has Walk Assist and an intelligent e-MTB mode that automatically delivers the right amount of power based on your terrain - Made with the same hard-charging frame tech as Remedy, like Mino Link adjustable geometry, a Straight Shot down tube for extra stiffness, and Active Braking Pivot (ABP) - The dropper post lets you lower your saddle on the fly so it's out of the way on descents

Featuring a universal design that allows the switch from a bolt to a QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - Collar can be converted to QR - Collar can be converted to QR - Machined from billet 2014 T6 aluminum - Bolt-compatible universal collars - Available in Black, Silver, Red, Blue, Purple, and Orange - Weight from 20g

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

We designed the Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit SPECS: FEATURES: - Double-weave fabric provides the best combination of weather protection, breathability, and stretch - Black reflective material placed in key areas enhances your nighttime visibility - Minimal and secure webbing waist adjustment - Zipper and snap ankle closure fits over 45NRTH boots without creating excess bulk - Imported POCKETS: - Front pockets and zippered rear pockets with side access VENTILATION: - Zippered ventilation at the thighs and lower leg - SUGGESTED TEMP RANGE - 0°F (-18°C) to 25°F (-4°C) Comfort MATERIALS: - 88% Recycled Nylon, 12% Elastane - Exclusive of trims

Durable, fiber-reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

The Campagnolo Chorus cassette offers cyclists even more versatility and greater choice and autonomy in terms of available gears. - Designed as the same width as 11-speed cassettes to maximize compatibility with wheels and frames - The two bigger sets of three in a single-block piece eliminate energy dispersion - Surface treatment increases durability and smoothness - Cassette Body Type: Campagnolo 10/11/12 Speed - Drivetrain Speeds: 12 - Color: Silver - Defined Color: Silver

Continental Cross Tubes are made of seamless butyl rubber and are individually tested for top quality. They're also heavier duty than standard tubes and perfect for the rough-and-tumble world that is cyclocross. - 48mm valve: 160 grams - 60mm valve: 165 grams

PROFESSIONAL TECHNOLOGY FOR BEGINNERS The Viantor is the high-quality and lightweight helmet for beginners in which we have used many proven technologies from the professional sport. Let yourself be convinced by a high-quality and safe helmet, which has the advantages of a professional race helmet. For maximum safety, the Viantor has the ActiCage structural reinforcement integrated in the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. The ActiCage allows for large ventilation openings without compromising on the helmet's safety. Due to its ponytail compatibility, the Viantor from ABUS is the first choice for riders with long hair. Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Ponytail compatibility: Helmet well suited for braided hairstyles - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - ActiCage: Structural reinforcement integrated in the EPS to optimize stability - Zoom Ace: Fine-adjustable adjustment system with non-slip adjustment wheel for individual fit

Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

These Shimano-compatible 8-speed shifters feature comfortable ergonomics, easy installation, and durability you can rely on. Whether you're replacing a broken shifter, doing a drop bar conversion, or building from scratch, these well-constructed shifters will do the trick. - Includes cable and housing - Separate, dedicated lever for upshifts and downshifts - Replaceable hood cover and face plate - External shift cable routing for low friction, smooth response and easy cable and housing replacement - Compatible with Shimano 8-speed road systems