Your Search: "serfas"

Ring-a-ding-a-ding! Get noticed and keep slowpokes out of your way with Serfas' line of minimalist-style, simple-to-use handlebar mounted bicycle bells. The perfect socially acceptable alternative to shouting crowd favorites such as "watch out!" and "move it or lose it!" - Brass Construction (Longer Ringing Tone Compared To Aluminum Construction) - Multi-Strike Mechanism - Secure Screw Type Bracket w/ Rubber Insert - Polished Brass Finish - Fits 19 - 22.2mm Diameter Handlebar

End your seat discomfort by installing a Serfas Gel Saddle Pad. Thanks to super-plush gel, this sweet cover provides a level of comfort you have to feel to believe. Plus, it features easy drawstring installation, which means you can quickly move it between bikes if you ride more than one. There's no easier way to upgrade your bike and ride more comfortably. • Deep Groove for Increased Blood Flow • Gel For Increased Friction Protection • Easy Drawstring Installation

The RX Race Ready saddle has all the performance benefits of Serfas' RX design but brings them to you in a sleek and nimble package. It boasts a dual density base for cushioned support and is split into halves that flex to reduce friction and increase comfort. Plus, a lightweight foam offers padding for your sit bones and a soft Lorica cover is waterproof to increase the longevity of this sweet saddle. • Ultra Light Foam • Twin Bar Design • Rails: Chromoly • Size: 270mm x 158mm • Weight: 320 Grams • Cover: Soft Feel Lorica

Be your own titan of cycling safety—gear up and be seen with the compact and highly visible Serfas Titan Helmet Tail Light. With a higher up and more easily noticed helmet safety light, motorists will appreciate your improved visibility and your mother will thank you for playing it safe. It features a magnetic retention system that safely breaks away during a crash, a Last Mode Memory that remembers the last mode used when you turn the light on, and easily replaceable batteries. - Powerful magnetic helmet mount system with simple install/removal - Ultra Bright Red LED (15 Lumens Max. Output) - Weight: 18g w/ Bracket - Battery: (2x) Lithium CR2032 (Pre-Installed Batteries Included w/ Plastic Pull Tab To Activate Before First Use) - Light Body Dimensions: 29 x 29 x 20mm Modes: - Solid: High – 35 Hours (6 Lumens) / Low – 45 Hours (3 Lumens) - Flash: Daytime High Flash – 60 Hours (15 Lumens) / High Flash – 40 Hours (8 Lumens) / Low Flash – 100 Hours (3 Lumens)

Ring-a-ding-a-ding! Get noticed and keep slowpokes out of your way with our Serfas line of minimalist style simple-to-use handlebar mounted bicycle bells. The perfect socially acceptable alternative to shouting crowd favorites such as "watch out!" and "move it or lose it!" Features - Brass Construction (Longer Ringing Tone Compared To Aluminum Construction) - Single Strike Mechanism - Secure Screw Type Bracket w/ Rubber Insert - Black Painted Brass Specs - Bar Fitment: 22.2 to 25.4mm Diameter Handlebar

The Serfas Pocket Cable Lock is lightweight and fits comfortably in your jersey or pant pocket. It's recommended for when your bike is within view to keep people honest and for those quick in-and-out stops when you don't have someone to watch your bike. It can also be used as a convenient secondary security measure to secure items like helmets, saddles, cages, wheels, and bags to your bike. The retractable braided steel cable will fit through most zipper loops so you can also lock bags closed while securing them to your bike. - 4-Digit resettable combo lock - Adjustable cable length - Pocket-sized for easy transport - Cable Length: 3.9ft - Cable Diameter: 1.6mm - Weight: 88g

Quick Overview Breathable Materials And Construction Easy-Off Finger Pull Loops Soft Foam Palm Pad For Comfort Features: - Soft Foam Palm Pad For Comfort - Easy-Off Finger Pull Loops - Highly Resilient Microfiber Palm Material - Ultra Soft Thumb Towel For Wiping Perspiration - Neoprene Cuff For Flexibility - Breathable Four-Way Stretch Upper 90 Day Warranty Have peace of mind – Every pair of Serfas® gloves is backed by a 90 Day Warranty to ensure the product you receive is of the highest quality and free of any manufacturing defect.

The Serfas® eDASH Plus 500W Mid-Drive represents affordable entries into the e-bike market while offering plentiful power, range, and comfort.

Replacement Part – Universal Tail Light Bracket - Fits all current tail lights with removable bracket except UTL-4bk - Long silicone strap allows endless mounting options - No tools needed - Not compatible with: TST-70, TST-100, TST-150 & TBT-50R

Replacement Part – Uni Smart Pump Head - New FP-200 Replacement Head MTL Lever - Not compatible as Grey Smart Head replacement

Designed with a smart inverted tread pattern, the Serfas MEO Series Drifter provides high-performance handling and speed on road with less rolling resistance while boasting impressive versatility and grip on loose surfaces like dirt and gravel. - Wire Bead - 30 TPI—Inverted Tread Design - Inverted Tread Design - Low Rolling Resistance Allows Greater Straight-Line Speed - 68 Durometer Center For Durability and Long Tread Life, 58 Durometer Outer Tread For Enhanced Cornering Grip

Quick Overview Premium Short Finger Glove Design Dual Glove Removal Pull Loops Breathable Materials and Construction Foam Pads With Silicone Grips Features: - Soft Foam Padding For Comfort - Adjustable Velcro Strap Closure For Secure Fit - Highly Resilient Microfiber Palm Material - Neoprene Cuff For Optimal Flexibility - Perforated Vented Palms - Silicone Grips - Natural Fit Curved Construction - Breathable Materials and Four-Way Stretch Upper - Ultra Soft Thumb Towels For Wiping Perspiration 90 Day Warranty Have peace of mind – Every pair of Serfas® gloves is backed by a 90 Day Warranty to ensure the product you receive is of the highest quality and free of any manufacturing defect.

Designed with a smart inverted tread pattern, the Serfas MEO Series Drifter provides high-performance handling and speed on road with less rolling resistance while boasting impressive versatility and grip on loose surfaces like dirt and gravel. - Wire Bead - 30 TPI—Inverted Tread Design - Inverted Tread Design - Low Rolling Resistance Allows Greater Straight-Line Speed - 68 Durometer Center For Durability and Long Tread Life, 58 Durometer Outer Tread For Enhanced Cornering Grip

An economical and stylish starter headlight that uses common AA (1x) batteries. (Batteries included) Starter SL-80 Headlight: - Side Lighting For 180-Degree Visibility - AA Battery Operation - Easy Battery Access - Modes: High (80 Lumens) 1.75 Hours / Medium (40 Lumens) 3.25 Hours / Low (20 Lumens) 7.5 Hours / High Flash – 8 Hours- Daytime Flash – 10 Hours - Runtime: Up To 10 Hours (On Daytime Flash) - Weight: 90 Grams w/ Bracket

Breathable materials and construction. Easy-off finger pull loops. Soft foam palm pad for comfort. - Soft Foam Palm Pad For Comfort - Easy-Off Finger Pull Loops - Highly Resilient Microfiber Palm Material - Ultra-Soft Thumb Towel For Wiping Perspiration - Neoprene Cuff For Flexibility - Breathable Four-Way Stretch Upper

- Comes With 3 Different Colored Lace Sets: Black, Orange & Neon Yellow - Easy Walking All-Terrain Sole - Wide Toe Box - Lace Up Design - Rugged Sides For Durability - Brushed Micro Suede Synthetic Upper - High Visibility Accents - SPD Compatible Deep Lugged Sole - High-Efficiency Ventilation - Reinforced Toe Area - Soft Cushioned Insole

Premium short finger glove design. Breathable materials and construction. Foam pads with silicone grips. Highly luminescent high-visibility design. - Soft Foam Padding For Increased Comfort - Adjustable Velcro Strap Closure For Secure Fit - Hi-Vis Color and Design Increases Rider Visibility - Highly Resilient Microfiber Palm Material - Neoprene Cuff For Optimal Flexibility - Perforated Vented Palms - Silicone Grips - Natural Fit Curved Construction - Breathable Materials and Four-Way Stretch Upper - Ultra-Soft Thumb Towels For Wiping Perspiration

- Comes with 3 different colored lace sets: black, pink & teal - Easy walking all-terrain sole - Wide toe box - Lace-up design - Rugged sides for durability - Brushed micro suede synthetic upper - High visibility accents - SPD compatible deep lugged sole - High-efficiency ventilation - Reinforced toe area - Soft cushioned insole

The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head will get you back on your way in a hurry. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits All Threaded CO2 Cartridge Sizes - Alloy Mini Head With Threaded Spring Push Design - Small, Lightweight, Compact Design - Weight: 18 Grams w/o CO2s

- Ulnar Channel Nerve Relief Reduces Hand Fatigue - RX Gel Palm Padding - Hi-Vis Color and Reflective Accents - Easy-Off Dual Glove Removal Pulls - Synthetic Leather Abrasion-Resistant Palms - Partitioned Padding Maintains Flexibility - Secure Velcro Closure - Soft Synthetic Suede Thumb Towel - Breathable Palm Materials Keep Hands Cool and Dry - Breathable Mesh & Lycra Upper Blend - Silicone-Coated Palm For Optimal Grip - Magnetic Glove Pairing

Cover your six with the super bright UTL-9 Flat Panel LED Tail Light! A great everyday versatile rear-facing light easily mounted on-bike with included rubber strap mount or practically anywhere imaginable using the strong and secure built-in metal belt clip. Designed using a panel of 40 micro LEDs putting out 40 Lumens (*On Daytime Flash) of super bright red light, you'll be sure to stay visible wherever you ride. - Super bright (40 lumens) *on daytime flash - 40 micro LED panel - Large visible surface area - Gunmetal colored body - Ipx4 water resistant - Micro USB rechargeable - Built-in metal belt clip - Easy bracket angle adjustability - Solid Modes: High (20 Lumens): 3 hrs, Low (10 Lumens): 6 hrs - Flash Modes: Daytime Flash (40 Lumens) & High Flash (10 Lumens): 12 hrs - Weight: 41 Grams w/ Bracket - Battery: Lithium Polymer

The World's Most Technologically Advanced Saddle Pad. Lifetime Weatherproof Guarantee. - Great Waterproof Cover - Figure-8 Drawstring For A Secure Fit - Friction-Free Gel - Cover Material: Weatherproof - Length: 247mm - Width: 182mm - Weight: 196g

Air Force Tier Three floor pump - Premium Rubber Overmolded Ergonomic Handle - Top Mounted 2.5" Analog Pressure Gauge (PSI/BAR) - Larger More Stable Pump Base - Simple Valve Head (Presta/Schrader) - Integrated Hose Keeper - All Metal Barrel and Pump Base - 28 1/2" Pump Height

From city commutes to rolling adventures through the countryside, the Serfas eDASH series of Class 2 e-bikes offer comfort and convenience in a lightweight and powerful package. Equipped with a Bafang 500W 48V brushless rear hub motor, a long-lasting 636Wh battery, and five levels of pedal assistance, you'll have no problem exploring new places to ride at speeds up to 28mph. Hydraulic disc brakes make stopping easy—even in wet weather—and the Shimano 8-speed drivetrain has the right amount of gearing to ensure every outing is full of fun. The Step-through model offers greater accessibility for those with limited range of motion or who simply enjoy the extra ease a lower frame height offers.

Protect your tube from spoke hooks with CT Cotton Rim Tape. - Adhesive Backing - 10 Rolls Per Box

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

- 14mm socket for removing axle bolt - Rotating tip and non slip handle for ease of use - Chromoly construction

- Removes square, ISIS, and Octalink style cranks - Recessed threads won't damage crank threads

- No. series headsets offer excellent performance and value - No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications - No. 10 S.H.I.S.: ZS44/28.6|ZS44/30 - No. 8B S.H.I.S.: IS42/28.6|IS42/30 - Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B) - Color: Black - Weight: 93g (No. 10), 74g (No. 8B)

- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup - Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings - Big Fat Pig feature super oversized caged ball bearings - Pig: External Cup, traditional - Pig S.H.I.S.: EC34/28.6|EC34/30 - Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40 - Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro) - Color: Black - Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)

- Forged steel cups with caged 5/32" ball bearings - TH-857 features a alloy top cover - TH Series: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 14.9mm/11mm - Color: Black - Weight: 126g

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Sunlite's Series II Chain Tool works with Shimano IG, HG, and UG chains. The vinyl coated handles make chain maintenance a breeze, and the screw style makes loosening up a stiff link easy.

• 14/15mm • 8mm Hex

The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes

F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel

ENVE has found that a dropper seatpost can enhance the gravel experience and that 40mm of drop is just the right amount for most gravel riding and racing. A dropper post allows the rider to lower their center of gravity on descents which can result in greater control and therefore confidence. While designed primarily for gravel riders, the G Series Dropper allows XC riders and racers a lightweight dropper with just the right amount of drop. - 395 grams (can be trimmed for an additional 40 grams in weight savings) - Mechanical actuation - Internal Routing Only - 40mm of drop/travel - 350mm length (Min Post Height: 140mm seat post clamps saddle rail - 27.2mm diameter post (Includes shims for 30.9mm and 31.6mm posts) - Fully serviceable, no special tools required - Compatible with all cable actuated remote levers

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warrranty

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

- Polyurethane layer is anti-slip with high tensile strength for long-term performance - Availabe in new graduated color fades to add even more style and personalization to your bike - GEL is vibration damping and shock absorbing to minimize fatigue and strain due to real-world riding conditions - Reliable and reusable Lock-In bar end plugs

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

- 12.7mm hardened high-grade performance alloy steel shackle resists hand tools - New hardened double deadbolt engages both shackle-ends increasing holding power - Patented new "pass-thru" crossbar design includes anti-rotation features providing advanced protection against twist and single cut attacks - Includes FlexFrame-U bracket providing convenient multi-location u-lock transport - Includes 2 stainless steel keys with an ergonomic design to reduce torque and keep them from bending or breaking - New sliding dustcover - Reinforced hardened crossbar design provides more protection for the lock internals - Key Safe Program - Product dimensions: 3.25” x 7” (8.2cm x 17.8cm) - Product weight: 2.5 lbs (1.13 kgs)

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The Protege Series are great for training, touring, or keeping track of car-free miles. - Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance - Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit - Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button - Auto start/stop and LCD shut off - Fits 25.0-31.8mm handlebars - Weight: 57 grams with bracket and sensor - Case size: 40mm x 47mm - Height (w/ bracket): 27 mm

The Protege Series are great for training, touring, or keeping track of car-free miles. - Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance - Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit - Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button - Auto start/stop and LCD shut off - Fits 25.0-31.8mm handlebars - Weight: 57 grams with bracket and sensor - Case size: 40mm x 47mm - Height (w/ bracket): 27 mm

Kryptonite's Evolution Series 4 1090 Integrated Chain is a 10mm-thick, six-sided link chain made of triple-heat-treated manganese steel for maximum strength. At 35.5-inches long, the Evolution gives you biking security in an easy-to-carry package. The links are covered with a weather-resistant nylon sleeve that protects your bike's finish, and it uses an integrated high-security cylinder that is pick, drill, and cut resistant. Three keys are included, including one that has a high-intensity LED bulb for convenient, easy unlocking in the dark. This chain has an anti-theft protection offer.

Kryptonite's KryptoLok Series 2 915 Integrated Chain is a 9mm-thick, four-sided link chain made of triple-heat-treated, boron-manganese steel for serious strength. Its integrated high-security lock cylinder is pick, drill, and cut resistant. This five-foot chain is covered with a weather-resistant nylon sleeve that protects your bike's finish. Plus, the KryptoLok Series 2 has an anti-theft protection offer.

Cane Creek 40 EC Headset Lowers - Compatible with tapered 1-1/8" to 1-1/4" steerer tubes

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.